Calculating deflection of beam under concentrated force using strength of materials and Abaqus
In this question, we intend to calculate the maximum deflection of the beam using the Strength of Materials and Abaqus software and compare the results obtained from the Abaqus software with those of the Strength of Materials subsequently
As you observe in this picture, a 300-Newton force is applied to the end of the beam and we intend to calculate the deflection of the beam due to the force of 300 Newton
The length of the beam is 1 m and the cross-section of the beam is one square with a side equal to 0.02 m
In this training video, we solve this problem once using the Abaqus software and once the problem is solved benefitting from the Strength of Materials and the results of both are compared together subsequently
In the diagram below, the deflection of beam is calculated using Abaqus software
As you observe, the results obtained from the Abaqus software are quite equal to those having been gained in the Strength of materials
There are no reviews yet.